News Category
Contact us
    Phone: 0755-29974699 0755-33819958 0755-33819959
    Fax: 0755-29974669
    Zip Code:518103
    E-mail: pucent@pucent.com
    Address: Fifth floor, A Building, Baoxianghe Industrial of Heping, Fuyong Town, Bao'an District of Shenzhen, China
Frequently Asked Questions

    The battery charging Cautions

    1 Charge
    Must have a constant current and constant voltage, in order to fully charged battery charging
    The charging current must be less than 2C5A / battery
    The charging voltage should not exceed 4.3V / battery
    2. Discharge
    Lithium battery pack
    The discharge current must be less than to 2C5A / battery.
    The discharge temperature range of -20-60 ° C
    Discharge termination voltage of 2.75V / battery
    3 necessary to protect the line
    Should meet the following requirements in order to ensure safety.
    Charger and protection circuit
    Charger terminal voltage requirements at 4.200 ± 0.049V; overcharge detection voltage requirements of 4.25 ± 0.020V; overcharge release voltage requirements of rechargeable batteries Road should meet the following requirements
    Charger terminal voltage requirements at 4.200 ± 0.049V; overcharge detection voltage requirements of 4.25 ± 0.020V; overcharge release voltage requirements in 4.15 ± 0.050V; discharge terminal voltage of 3.00 ± 0.10V; over discharge detection voltage of 2.7 ± 0.08V; overdischarge release voltage 3.0 ± 0.01V; the requirements of the current detection value 3.0 ± 1.0A
    4. Note
    Battery pack precautions
    Lithium batteries, such as of TA1, TA2), in order to prevent abnormal leaving the battery due to equipment failure. Protective equipment must be set to the appropriate position with the battery, so that the protective equipment to get the exact temperature of the battery.

Previous:Nickel-cadmium batteries, lithium and nickel-metal hydride battery Next:Battery capacity test standards